Senin, 23 Januari 2012

Klaus-Jurgen Bathe

Klaus-Jurgen Bathe

Professor of Mechanical Engineering

Room 3-356
Massachusetts Institute of Technology
77 Massachusetts Avenue
Cambridge MA 02139-4307
Phone:             617-253-6645 begin_of_the_skype_highlighting            617-253-6645      end_of_the_skype_highlighting        
Fax: - -   
Email: 

 

Research Interests
Computational mechanics procedures for solids, structures, fluids, fluid-structure interactions, electromechanics, multiphysics, and multiscale

 

Academic Degrees
B.Sc. 1967 University of Cape Town, South Africa
M.Sc. 1969 University of Calgary, Canada
Ph.D. 1971 University of California, Berkeley
D.Sc. University of Cape Town, South Africa
Dr. h.c. Slovak Academy of Sciences and Technical University of Zilina, Slovakia
Dr.-Ing. E.h., Technical University of Darmstadt, Germany
Dr. h.c. Technical University of Rzeszow, Poland
Dr. h.c. Technical University of Madrid (Universidad Politécnica de Madrid), Spain
Dr. h.c. University of Bucharest, Romania
Dr. h.c. University of Miskolc, Hungary
Dr. h.c. University of Buenos Aires, Argentina

 

Founder of ADINA R & D, Inc.

 

Editorial Activities
Co-editor of the Journal, Computers & Structures (link)

Editor of the Series
Computational Fluid and Solid Mechanics, Springer Verlag (link)
Nonlinear Finite Element Analysis and ADINA, 12 volumes (link)
Computational Fluid and Solid Mechanics, Elsevier, 6 volumes (link)

 

Books
  1. K. J. Bathe and E. L. Wilson, "Numerical Methods in Finite Element Analysis", Prentice-Hall, 1976 (link)
  2. K. J. Bathe, "Finite Element Procedures in Engineering Analysis", Prentice-Hall, 1982 (link)
  3. K. J. Bathe, "Finite Element Procedures", Cambridge, MA: Klaus-Jürgen Bathe, 2006 (link)
  4. D. Chapelle and K. J. Bathe, "The Finite Element Analysis of Shells – Fundamentals", Springer, 2003 (link)
  5. M. Kojic and  K. J. Bathe, "Inelastic Analysis of Solids and Structures", Springer, 2005 (link)
  6. K. J. Bathe, "To Enrich Life", Amazon.com, 2007 (link)
  7. D. Chapelle and K. J. Bathe, "The Finite Element Analysis of Shells – Fundamentals", Second Edition, Springer,  2011 (link)
  8. M. L. Bucalem and K. J. Bathe, "The Mechanics of Solids and Structures -- Hierarchical Modeling and the Finite Element Solution", Springer, 2011 (link)

Online Courses on Finite Element Methods
Finite Element Procedures for Solids and Structures (link)
Finite Element Analysis of Solids and Fluids I (link)
Finite Element Analysis of Solids and Fluids II (link)

 

Much Referred to Publications Published Prior 1998
  1. K.J. Bathe and E.L. Wilson, “Large Eigenvalue Problems in Dynamic Analysis”, ASCE, Journal of the Engineering Mechanics Division, 98 (6), 1471-1485, 1972 (.pdf)
  2. K.J. Bathe and E.L. Wilson, “Solution Methods for Eigenvalue Problems in Structural Mechanics”, Int. J. for Numerical Methods in Engineering, 6, 213–266, 1973 (.pdf)
  3. K.J. Bathe and E.L. Wilson, “Stability and Accuracy Analysis of Direct Integration Methods”, International Journal of Earthquake Engineering and Structural Dynamics, 1, 283–291, 1973 (.pdf)
  4. K.J. Bathe and E.L. Wilson, “NONSAP––A Nonlinear Structural Analysis Program”, J. Nuclear Engineering and Design, 29, 266–293, 1974 (.pdf)
  5. K.J. Bathe, E. Ramm and E.L. Wilson, “Finite Element Formulations for Large Deformation Dynamic Analysis”, Int. J. for Numerical Methods in Engineering, 9, 353–386, 1975 (.pdf)
  6. S.M. Ma and K.J. Bathe, “On Finite Element Analysis of Pipe Whip Problems”, J. Nuclear Engineering and Design, 37, 413–430, 1976 (.pdf)
  7. K.J. Bathe and H. Ozdemir, “Elastic–Plastic Large Deformation Static and Dynamic Analysis”, Computers & Structures, 6 (2), 81–92, 1976 (.pdf)
  8. K.J. Bathe, S. Bolourchi, S. Ramaswamy and M.D. Snyder, “Some Computational Capabilities for Nonlinear Finite Element Analysis”, J. Nuclear Engineering and Design, 46, 429–455, 1978 (.pdf)
  9. K.J. Bathe and S. Bolourchi, “Large Displacement Analysis of Three-Dimensional Beam Structures”, Int. J. for Numerical Methods in Engineering, 14, 961– 986, 1979 (.pdf)
  10. K.J. Bathe and S. Ramaswamy, “On Three-Dimensional Nonlinear Analysis of Concrete Structures”, J. Nuclear Engineering and Design, 52, 385–409, 1979 (.pdf)
  11. K.J. Bathe and M. Khoshgoftaar, “Finite Element Formulation and Solution of Nonlinear Heat Transfer”, J. Nuclear Engineering and Design, 51, 389–401, 1979 (.pdf)
  12. R.O. Ritchie and K.J. Bathe, “On the Calibration of the Electrical Potential Technique for Monitoring Crack Growth Using Finite Element Methods”, J. of Fracture, 15, 47–55, 1979 (.pdf)
  13. K.J. Bathe, M.R. Khoshgoftaar, “Finite Element Free Surface Seepage Analysis without Mesh Iteration”, Int. J. for Num. and Anal. Meth. in Geomechanics, 3,13-22, 1979 (.pdf)
  14. K.J. Bathe and W.F. Hahn, “On Transient Analysis of Fluid-Structure Systems”, Computers & Structures, 10, 383-391, 1979 (.pdf)
  15. K.J. Bathe and S. Ramaswamy, “An Accelerated Subspace Iteration Method”, J. Comp. Meth. in Appl. Mech. and Eng., 23, 313–331, 1980 (.pdf)
  16. K.J. Bathe and V. Sonnad, “On Effective Implicit Time Integration in Analysis of Fluid-Structure Problems”, Int. J. Numerical Methods in Eng., 15, 943–948, 1980 (.pdf)
  17. J.L. Batoz, K.J. Bathe, L. W. Ho, “A Study of Three-Node Triangular Plate Bending Elements”, Int. J. Numerical Methods in Eng., 15, 1771-1812, 1980 (.pdf)
  18. K.J. Bathe and A.P. Cimento, “Some Practical Procedures for the Solution of Nonlinear Finite Element Equations”, J. Computer Meth. in Applied Mech. And Eng., 22, 59–85, 1980 (.pdf)
  19. K. J. Bathe and S. Bolourchi, “A Geometric and Material Nonlinear Plate and Shell Element”, Computers & Structures, 11, 23-48, 1980 (.pdf)
  20. M. S. Engelman, G. Strang, K. J. Bathe, “The Application of Quasi-Newton Methods in Fluid Mechanics”, Int. J. Numerical Methods in Eng., 17, 707-718, 1981 (.pdf)
  21. K.J. Bathe and S. Gracewski, “On Nonlinear Dynamic Analysis using Substructuring and Mode Superposition”, Computers & Structures, 13, 699–707, 1981 (.pdf)
  22. M.D. Snyder and K.J. Bathe, “A Solution Procedure for Thermo-Elastic-Plastic and Creep Problems”, J. Nuclear Engineering and Design, 64, 49–80, 1981 (.pdf)
  23. K.J. Bathe and L.W. Ho, “A Simple and Effective Element for Analysis of General Shell Structures”, Computers & Structures, Vol.13, 673-681, 1981 (.pdf)
  24. K.J. Bathe and C. Almeida, “A Simple and Effective Pipe Elbow Element Interaction Effects”, J. Appl. Mech., 49, 165–171, 1982 (.pdf)
  25. W.D. Rolph III and K.J. Bathe, “An Efficient Algorithm for Nonlinear Heat Transfer with Phase Changes”, Int. J. for Numerical Methods in Engineering, 18, 119–134, 1982 (.pdf)
  26. K.J. Bathe and E.N. Dvorkin, “On the Automatic Solution of Nonlinear Finite Element Equations”, Computers & Structures, 17, 871–879, 1983 (.pdf)
  27. K.J. Bathe, E. Dvorkin, and L. W. Ho, “Our Discrete-Kirchhoff and Isoparametric Shell Elements for Nonlinear Analysis An Assessment”, Computers & Structures, 16 (1-4), 89-98, 1983 (.pdf)
  28. L.G. Olson, and K.J. Bathe, “A study of displacement-based fluid finite elements for calculating frequencies of fluid and fluid-structure systems”, Nuclear Engineering and Design, 76, 137-151, 1983 (.pdf)
  29. E.N. Dvorkin and K.J. Bathe, “A Continuum Mechanics Based Four-Node Shell Element for General Nonlinear Analysis”, Engineering Computations, 1, 77–88, 1984 (.pdf)
  30. K.J. Bathe and E.N. Dvorkin, “A Four-Node Plate Bending Element Based on Mindlin Reissner Plate Theory and a Mixed Interpolation”, Int. J. for Numerical Methods in Engineering, 21, 367–383, 1985 (.pdf)
  31. L.G. Olson and K.J. Bathe, “Analysis of Fluid-Structure Interactions––A Direct Symmetric Coupled Formulation Based on a Fluid Velocity Potential”, Computers & Structures, 21, 21–32, 1985 (.pdf)
  32. L.G. Olson and K.J. Bathe, “An Infinite Element for Analysis of Transient Fluid-Structure Interactions”, J. Engineering Computations 2, 319–329, 1985 (.pdf)
  33. T. Sussman and K.J. Bathe, “The Gradient of the Finite Element Variational Indicator with Respect to Nodal and Applications in Fracture Mechanics and Mesh Optimization”, Int. J. for Numerical Methods in Engineering, 21, 763-774, 1985 (.pdf)
  34. K.J. Bathe and A.B. Chaudhary, “A Solution Method for Planar and Axisymmetric Contact Problems”, Int. J. for Numerical Methods in Engineering, 21, 65–88, 1985 (.pdf)
  35. A.B. Chaudhary and K.J. Bathe, “A Solution Method for Static and Dynamic Analysis of Three-Dimensional Contact Problems with Friction”, Computers & Structures, 24 (6), 855–873, 1986 (.pdf)
  36. T. Sussman and K.J. Bathe, “Studies of Finite Element Procedures Stress Band Plots and the Evaluation of Finite Element Meshes”, Engineering Computations, 3, 178–191, 1986 (.pdf)
  37. K.J. Bathe and E.N. Dvorkin, “A Formulation of General Shell Elements––The Use of Mixed Interpolation of Tensorial Components”, Int. J. for Numerical Methods in Engineering, 22, 697–722, 1986 (.pdf)
  38. T. Sussman and K.J. Bathe, “A Finite Element Formulation for Nonlinear Incompressible Elastic and Inelastic Analysis”, Computers & Structures, 26, 357–409, 1987 (.pdf)
  39. M. Kojic and K.J. Bathe, “The Effective-Stress-Function Algorithm for Thermo-Elasto-Plasticity and Creep”, Int. J. for Numerical Methods in Engineering, 24, 1509–1532, 1987 (.pdf)
  40. M. Kojic and K.J. Bathe, “Studies of Finite Element Procedures Stress Solution of a Closed Elastic Strain Path with Stretching and Shearing using the Updated Lagrangian Jaumann Formulation”, Computers & Structures, 26 (l/2), 175-179, 1987 (.pdf)
  41. T. Sussman and K. J. Bathe, “Some advances in the analysis of semideformable media”, Computers & Structures, 30 (112), 105-112, 1988 (.pdf)
  42. K.J. Bathe, F. Brezzi and S.W. Cho, “The MITC7 and MITC9 Plate Bending Elements”, Computers & Structures, 32 (3/4), 797–814, 1989 (.pdf)
  43. F. Brezzi, K.J. Bathe and M. Fortin, “Mixed-Interpolated Elements for Reissner Mindlin Plates”, Int. J. for Numerical Methods in Engineering, 28, 1787–1801, 1989 (.pdf)
  44. K.J. Bathe, J. Walczak, A. Welch and N. Mistry, “Nonlinear Analysis of Concrete Structures”, Computers & Structures, 32 (3/4), 563–590, 1989 (.pdf)
  45. S.W. Chae and K.J. Bathe, “On Automatic Mesh Construction and Mesh Refinement in Finite Element Analysis”, Computers & Structures, 32, 911–936, 1989 (.pdf)
  46. B. Haggblad, K. J. Bathe, “Specifications of Boundary-Conditions for Reissner Mindlin Plate Bending Finite-Elements”, Int. J. for Numerical Methods in Engineering, 30, 981-1011, 1990 (.pdf)
  47. A.L. Eterovic and K.J. Bathe, “A Hyperelastic-Based Large Strain Elasto-Plastic Constitutive Formulation with Combined Isotropic-Kinematic Hardening using the Logarithmic Stress and Strain Measures”, Int. J. Numerical Methods in Engineering, 30, 1099–1114, 1990 (.pdf)
  48. F. Brezzi and K.J. Bathe, “A Discourse on the Stability Conditions for Mixed Finite Element Formulations”, J. Computer Methods in Applied Mechanics and Engineering, 82, 27–57, 1990 (.pdf)
  49. K.J. Bathe, M. Bucalem and F. Brezzi, “Displacement and Stress Convergence of the MITC Plate Bending Elements”, J. Eng. Computations, 7 (4), 291–302, 1990 (.pdf)
  50. A.L. Eterovic and K.J. Bathe, “On the Treatment of Inequality Constraints Arising from Contact Conditions in Finite Element Analysis”, Computers & Structures, 40, 203–209, 1991 (.pdf)
  51. N.S. Lee and K.J. Bathe, “Effects of Element Distortions on the Performance of Isoparametric Elements”, Int. J. for Numerical Methods in Engineering, 36, 3553– 3576, 1993 (.pdf)
  52. D. Chapelle and K.J. Bathe, “The Inf-Sup Test”, Computers & Structures, 47 (4/5), 537–545, 1993 (.pdf)
  53. M. Bucalem and K.J. Bathe, “Higher-Order MITC General Shell Elements”, Int. J. for Numerical Methods in Engineering, 36, 3729–3754, 1993 (.pdf)
  54. K. Kato, N.S. Lee and K.J. Bathe, “Adaptive Finite Element Analysis of Large Strain Elastic Response”, Computers & Structures, 42, 829–855, 1993 (.pdf)
  55. C. Nitikitpaiboon and K.J. Bathe, “An Arbitrary Lagrangian–Eulerian Velocity Potential Formulation for Fluid–Structure Interaction”, Computers & Structures, 47, 871–891, 1993 (.pdf)
  56. K.J. Bathe, J. Walczak and H. Zhang, “Some recent advances for practical finite element analysis”, Computers & Structures, 47, 511-521, 1993 (.pdf)
  57. N.S. Lee and K.J. Bathe, “Error Indicators and Adaptive Remeshing in Large Deformation Finite Element Analysis”, Finite Elements in Analysis and Design, 16, 99–139, 1994 (.pdf)
  58. G. Gabriel and K.J. Bathe, “Some Computational Issues in Large Strain Elasto-Plastic Analysis”, Computers & Structures, 56 (2/3), pp. 249–267, 1995 (.pdf)
  59. D. Pantuso and K.J. Bathe, “A Four-Node Quadrilateral Mixed-Interpolated Element for Solids and Fluids”, Mathematical Models & Methods in Applied Sciences, 5 (8), 1113–1128, 1995 (.pdf)
  60. K.J. Bathe, H. Zhang and M.H. Wang, “Finite Element Analysis of Incompressible and Compressible Fluid Flows with Free Surfaces and Structural Interactions”, Computers & Structures, 56 (2/3), 193–213, 1995 (.pdf)
  61. P. Gaudenzi and K.J. Bathe, “An Iterative Finite Element Procedure for the Analysis of Piezoelectric Continua”, J. of Intelligent Material Systems and Structures, 6 (2), 266–273, 1995 (.pdf)
  62. K.J. Bathe, C. Nitikitpaiboon and X. Wang, “A Mixed Displacement-Based Finite Element Formulation for Acoustic Fluid–Structure Interaction”, Computers & Structures, 56, 225–237, 1995 (.pdf)
  63. K.J. Bathe, “Simulation of Structural and Fluid Flow Response in Engineering Practice”, Computer Modeling and Simulation in Engineering, 1, 47–77, 1996 (.pdf)
  64. X. Wang and K.J. Bathe, “Displacement Pressure Based Mixed Finite Element Formulations for Acoustic Fluid–Structure Interaction Problems”, Int. J. for Numerical Methods in Engineering, 40, 2001–2017, 1997 (.pdf)
  65. A. Iosilevich, K.J. Bathe and F. Brezzi, “On Evaluating the Inf-Sup Condition for Plate Bending Elements”, Int. J. for Numerical Methods in Engineering, 40, 3639– 3663, 1997 (.pdf)
  66. D. Pantuso and K.J. Bathe, “On the Stability of Mixed Finite Elements in Large Strain Analysis of Incompressible Solids”, Finite Elements in Analysis and Design, 28, 83–104, 1997 (.pdf)
  67. K.J. Bathe, O. Guillermin, J. Walczak and H. Chen, “Advances in Nonlinear Finite Element Analysis of Automobiles”, Computers & Structures, 64,881–891,1997 (.pdf)
  68. X. Wang and K.J. Bathe, “On Mixed Elements for Acoustic Fluid Structure Interactions”, Mathematical Models & Methods in Applied Sciences, 7 (3), 329–343, 1997 (.pdf)
  69. K.J. Bathe and P.A. Bouzinov, “On the Constraint Function Method for Contact Problems”, Computers & Structures”, 64 (5/6), 1069–1085, 1997 (.pdf)
  70. M.L. Bucalem and K. J. Bathe, “Finite Element Analysis of Shell Structures”, Archives of Computational Methods in Engineering, 4 (1), 3-61, 1997 (.pdf)
  71. K.J. Bathe, H. Zhang and X. Zhang, “Some Advances in the Analysis of Fluid Flows”, Computers & Structures, 64 (5/6), 909-930, 1997 (.pdf)

 

Principal Publications, since 1998

  1. D. Chapelle and K.J. Bathe, "Fundamental Considerations for the Finite Element Analysis of Shell Structures", Computers & Structures, 66 (1), 19-36, 1998 (.pdf)
  2. K.J. Bathe, Five articles published in ASME Mechanical Engineering Magazine: "How Automatic is Automatic Meshing?", March 1998 (.pdf); "Fluid-Structure Interactions", April 1998 (.pdf); "What Can Go Wrong in FEA?", May 1998 (.pdf); "Current Directions in Meshing", July 1998 (.pdf); "Crush Simulations of Cars with FEA", November 1998 (.pdf)
  3. K.J. Bathe, J. Walczak, O. Guillermin, P.A. Bouzinov and H. Chen, "Advances in Crush Analysis", Computers & Structures, 72 (1-3), 31-47, 1999 (.pdf)
  4. K.J. Bathe, H. Zhang and S. Ji, "Finite Element Analysis of Fluid Flows Fully Coupled with Structural Interactions", Computers & Structures, 72 (1-3), 1-16, 1999 (.pdf)
  5. K.J. Bathe, S. Rugonyi and S. De, "On the Current State of Finite Element Methods – Solids and Structures with Full Coupling to Fluid Flows", in Plenary Lectures of Fourth International Congress on Industrial and Applied Mathematics (J.M. Ball and J.C.R. Hunt, eds.), Oxford University Press, 2000 (.pdf)
  6. K.J. Bathe, D. Hendriana, F. Brezzi and G. Sangalli, "Inf-Sup Testing of Upwind Methods", International Journal for Numerical Methods in Engineering, 48, 745-760, 2000 (.pdf)
  7. K.J. Bathe, A. Iosilevich and D. Chapelle, "An Evaluation of the MITC Shell Elements", Computers & Structures, 75 (1), 1-30, 2000 (.pdf)
  8. K.J. Bathe, A. Iosilevich and D. Chapelle, "An Inf-Sup Test for Shell Finite Elements", Computers & Structures, 75 (5), 439-456, 2000 (.pdf)
  9. D. Hendriana and K.J. Bathe, "On Upwind Methods for Parabolic Finite Elements in Incompressible Flows", International Journal for Numerical Methods in Engineering, 47 (1-3), 317-340, 2000 (.pdf)
  10. D. Chapelle and K.J. Bathe, "The Mathematical Model Underlying General Shell Elements", International Journal for Numerical Methods in Engineering, 48 (2), 289-313, 2000 (.pdf)
  11. D. Pantuso, K.J. Bathe and P.A. Bouzinov, "A Finite Element Procedure for the Analysis of Thermo-Mechanical Solids in Contact", Computers & Structures, 75 (6), 551-573, 2000 (.pdf)
  12. S. Rugonyi and K.J. Bathe, "On the Analysis of Fully-Coupled Fluid Flows with Structural Interactions – a Coupling and Condensation Procedure", International Journal for Computational Civil and Structural Engineering, 1, 29-41, 2000
  13. S. De and K.J. Bathe, "The Method of Finite Spheres", Computational Mechanics, 25, 329-345, 2000 (.pdf)
  14. J.F. Hiller, S. De and K.J. Bathe, "On the State-of-the-Art of Finite Element Procedures and a Meshless Technique", in Computational Mechanics for the Twenty-First Century (B.H.V. Topping, ed.), Saxe-Coburg Publications, 2000
  15. D. Hendriana and K.J. Bathe, "On a Parabolic Quadrilateral Element for Compressible Flows", Computer Methods in Applied Mechanics and Engineering, 186, 1-22, 2000 (.pdf)
  16. S. De and K.J. Bathe, "The Method of Finite Spheres: Some Advances in Efficiency and Incompressible Analysis", Proceedings, Advances in Computational Engineering & Sciences, 2, 1499-1504, 2000
  17. S. De and K.J. Bathe, "Displacement/Pressure Mixed Interpolation in the Method of Finite Spheres", International Journal for Numerical Methods in Engineering, 51, 275-292, 2001 (.pdf)
  18. S. De and K.J. Bathe, "Towards an Efficient Meshless Computational Technique: The Method of Finite Spheres", Engineering Computations, 18, 170-192, 2001 (.pdf)
  19. S. De and K.J. Bathe, "The Method of Finite Spheres: A Summary of Recent Developments", in Computational Fluid and Solid Mechanics (K.J. Bathe, ed.), Elsevier, 2001 (.pdf)
  20. K.J. Bathe, "The Inf-Sup Condition and its Evaluation for Mixed Finite Element Methods", Computers & Structures, 79, 243-252, 2001 (.pdf)
  21. W. Bao, X. Wang and K.J. Bathe, "On the Inf-Sup Condition of Mixed Finite Element Formulations for Acoustic Fluids", Mathematical Models & Methods in Applied Sciences, 11 (5), 883-901, 2001 (.pdf)
  22. S. Rugonyi and K.J. Bathe, "On the Finite Element Analysis of Fluid Flows Fully Coupled with Structural Interactions", Computer Modeling in Engineering & Sciences, 2, 195-212, 2001 (.pdf)
  23. S. Rugonyi and K.J. Bathe, "Lyapunov Characteristic Exponent Calculation for Finite Element Discretized Models", in Computational Fluid and Solid Mechanics (K.J. Bathe, ed.), Elsevier, 2001 (.pdf)
  24. J.F. Hiller and K.J. Bathe, "On Higher-Order-Accuracy Points in Isoparametric Finite Element Analysis and Application to Error Assessment", Computers & Structures, 79, 1275-1285, 2001 (.pdf)
  25. N. El-Abbasi and K.J. Bathe, "Stability and Patch Test Performance of Contact Discretizations and a New Solution Algorithm", Computers & Structures, 79, 1473-1486, 2001 (.pdf)
  26. N. El-Abbasi and K.J. Bathe, "On a New Segment-to-Segment Contact Algorithm", in Computational Fluid and Solid Mechanics (K.J. Bathe, ed.), Elsevier, 2001 (.pdf)
  27. X. Wang, K.J. Bathe and J. Walczak, "A Stress Integration Algorithm for J3-Dependent Elasto-Plasticity Models", in Computational Fluid and Solid Mechanics (K.J. Bathe, ed.), Elsevier, 2001(.pdf)
  28. H. Zhang and K.J. Bathe, "Direct and Iterative Computing of Fluid Flows Fully Coupled with Structures", in Computational Fluid and Solid Mechanics (K.J. Bathe, ed.), Elsevier, 2001 (.pdf)
  29. M. Kawka and K.J. Bathe, "Implicit Integration for the Solution of Metal Forming Processes", in Computational Fluid and Solid Mechanics (K.J. Bathe, ed.), Elsevier, 2001 (.pdf)
  30. D. Chapelle and K.J. Bathe, "Optimal Consistency Errors for General Shell Elements", C.R. Acad. Sci. Paris, t. 332, Série I, 771-776, 2001 (.pdf)
  31. K.J. Bathe and F. Brezzi, "Stability of Finite Element Mixed Interpolations for Contact Problems", Atti della Accademia Nazionale dei Lincei, s. 9, 12, 159-166, 2001 (.pdf)
  32. S. De and K.J. Bathe, "The Method of Finite Spheres with Improved Numerical Integration", Computers & Structures, 79, 2183-2196, 2001 (.pdf)
  33. K.J. Bathe and J.P. Pontaza, "A Flow-Condition-Based Interpolation Mixed Finite Element Procedure for Higher Reynolds Number Fluid Flows", Mathematical Models & Methods in Applied Sciences, 12 (4), 525-539, 2002 (.pdf)
  34. S. Rugonyi and K.J. Bathe, "An Evaluation of the Lyapunov Characteristic Exponent of Chaotic Continuous Systems", International Journal for Numerical Methods in Engineering, 56, 145-163, 2003 (.pdf)
  35. Y. Guo and K.J. Bathe, " A Numerical Study of a Natural Convection Flow in a Cavity", International Journal for Numerical Methods in Fluids, 40, 1045-1057, 2002 (.pdf)
  36. P.S. Lee and K.J. Bathe, "On the Asymptotic Behavior of Shell Structures and the Evaluation in Finite Element Solutions", Computers & Structures, 80, 235-255, 2002 (.pdf)
  37. K.J. Bathe and H. Zhang, "A Flow-Condition-Based Interpolation Finite Element Procedure for Incompressible Fluid Flows", Computers & Structures, 80, 1267-1277, 2002 (.pdf)
  38. K.J. Bathe, J.F. Hiller and H. Zhang, "On the Finite Element Analysis of Shells and their Full Interaction with Navier-Stokes Fluid Flows", (B.H.V. Topping and Z. Bittnar, eds.), Computational Structures Technology, Civil-Comp Press, 2002; also special publication of the Croatian Academy of the Arts and Sciences, Zagreb, Sept. 2002
  39. K.J. Bathe, D. Chapelle and P.S. Lee, "A Shell Problem 'Highly-Sensitive' to Thickness Changes", International Journal for Numerical Methods in Engineering, 57, 1039-1052, 2003 (.pdf)
  40. J.F. Hiller and K.J. Bathe, "Measuring Convergence of Mixed Finite Element Discretizations: An Application to Shell Structures", Computers & Structures, 81, 639-654, 2003 (.pdf)
  41. K.J. Bathe, P.S. Lee and J.F. Hiller, "Towards Improving the MITC9 Shell Element", Computers & Structures, 81, 477-489, 2003 (.pdf)
  42. S. De, J.W. Hong and K.J. Bathe, "On the Method of Finite Spheres in Applications: Towards the Use with ADINA and in a Surgical Simulator", Computational Mechanics, 31, 27-37, 2003 (.pdf)
  43. J.W. Hong and K.J. Bathe, "On Analytical Transformations for Efficiency Improvements in the Method of Finite Spheres", in Computational Fluid and Solid Mechanics 2003 (K.J. Bathe, ed.), Elsevier, 2003 (.pdf)
  44. N. Elabbasi and K.J. Bathe, "Some Advances in Modeling Multiphysics-Biomedical Applications", in Computational Fluid and Solid Mechanics 2003 (K.J. Bathe, ed.), Elsevier, 2003 (.pdf)
  45. F.J. Montans and K.J. Bathe, "On the Stress Integration in Large Strain Elasto-Plasticity", in Computational Fluid and Solid Mechanics 2003 (K.J. Bathe, ed.), Elsevier, 2003 (.pdf)
  46. K.J. Bathe, "On the Development of Finite Element Methods and Software", Proceedings, Conference on Numerical Methods in Continuum Mechanics, Zilina, Slovakia, September 2003
  47. K.J. Bathe, "The Key Challenges in Computational Mechanics”, iacm expressions, No.14, October 2003 (.pdf)
  48. K.J. Bathe and H. Zhang, "Finite Element Developments for General Fluid Flows with Structural Interactions", International Journal for Numerical Methods in Engineering, 60: 213-232, 2004 (.pdf)
  49. K.J. Bathe and F.J. Montans, "On Modeling Mixed Hardening in Computational Plasticity", Computers & Structures, 82, 535-539, 2004 (.pdf)
  50. F.J. Montans and K.J. Bathe, "Computational Issues in Large Strain Elasto-Plasticity: An Algorithm for Mixed Hardening and Plastic Spin", International Journal for Numerical Methods in Engineering, 63, 159-196, 2005 (.pdf)
  51. D. Chapelle, A. Ferent and K.J. Bathe, "3D-Shell Elements and Their Underlying Mathematical Model", Mathematical Models & Methods in Applied Sciences, 14, 105-142, 2004 (.pdf)
  52. P.S. Lee and K.J. Bathe, "Development of MITC Isotropic Triangular Shell Finite Elements", Computers & Structures, 82: 945-962, 2004 (.pdf)
  53. N. Elabbasi, J.W. Hong and K.J. Bathe, "The Reliable Solution of Contact Problems in Engineering Design", International Journal of Mechanics and Materials in Design, 1, 3-16, 2004 (.pdf)
  54. K.J. Bathe, "On the State of Finite Element Procedures for Forming Processes", Proceedings of the International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM, Ohio State University, USA, June 2004 (.pdf)
  55. P.S. Lee and K.J. Bathe, "Insight into Finite Element Shell Discretizations by Use of the Basic Shell Mathematical Model", Computers & Structures, 83: 69-90, 2005 (.pdf)
  56. T. Grätsch and K.J. Bathe, Entwicklung von Finite-Elemente-Modellen - Stand und Tendenzen, Plenary Lecture, Proceedings, Baustatik und Baupraxis 9, TU Dresden 2005 (.pdf)
  57. J.W. Hong and K.J. Bathe, "Coupling and Enrichment Schemes for Finite Element and Finite Sphere Discretizations", Computers & Structures, 83, 1386-1395, 2005 (.pdf)
  58. H. Kohno and K.J. Bathe, "Insight into the Flow-Condition-Based Interpolation Finite Element Approach: Solution of Steady-State Advection-Diffusion Problems, International Journal for Numerical Methods in Engineering, 63, 197-217, 2005 (.pdf)
  59. T. Grätsch and K.J. Bathe, "A posteriori Error Estimation Techniques in Practical Finite Element Analysis", Computers & Structures, 83, 235-265, 2005 (.pdf)
  60. T. Grätsch and K.J. Bathe, "Influence Functions and Goal-Oriented Error Estimation for Finite Element Analysis of Shell Structures", International Journal for Numerical Methods in Engineering, 63, 709-736, 2005 (.pdf)
  61. F.J. Montans and K.J. Bathe, "Large Strain Anisotropic Plasticity Including Effects of Plastic Spin", in Computational Fluid and Solid Mechanics 2005 (K.J. Bathe, ed.), Elsevier, 377-381, 2005 (.pdf)
  62. M.M.I. Baig and K.J. Bathe, "On Direct Time Integration in Large Deformation Dynamic Analysis", in Computational Fluid and Solid Mechanics 2005 (K.J. Bathe, ed.), Elsevier, 2005 (.pdf)
  63. H. Kohno and K.J. Bathe, "On the Flow-Condition-Based Interpolation Approach for Incompressible Fluids", in Computational Fluid and Solid Mechanics 2005 (K.J. Bathe, ed.), Elsevier, 2005 (.pdf)
  64. T. Grätsch and K.J. Bathe, "Goal-oriented Error Estimation in the Analysis of Fluid Flows with Structural Interactions", Comp. Meth. in Applied Mech. and Eng., 195, 5673-5684, 2006 (.pdf)
  65. H. Kohno and K.J. Bathe, "A Flow-Condition-Based Interpolation Finite Element Procedure for Triangular Grids", Int. J. Num. Meth. in Fluids, 51, 673-699, 2006 (.pdf)
  66. K. J. Bathe and M. M. I. Baig, "On a Composite Implicit Time Integration Procedure for Nonlinear Dynamics", Computers & Structures , 83, 2513 -2534, 2005 (.pdf)
  67. F.J. Montans and K.J. Bathe, "On a Theoretical and Computational Framework for Large Strain Anisotropic Plasticity", Computational Plasticity, Proceedings 8th Int. Conference on Computational Plasticity, D.R.J. Owen and E. Onate, eds., Barcelona, 2005 (.pdf)
  68. H. Kohno and K.J. Bathe, "A 9-node Quadrilateral FCBI Element for Incompressible Navier-Stokes Flows", Comm. in Num. Methods in Eng., 22, 917-931, 2006 (.pdf)
  69. B. Banijamali and K.J. Bathe, "The CIP Method Embedded in Finite Element Discretizations of Incompressible Flows", Int. J. for Numerical Methods in Eng., 71, 66-80, 2007 (.pdf)
  70. P.S. Lee, H.C. Noh and K.J. Bathe, "Insight into 3-node Triangular Shell Finite Elements: the Effects of Element Isotropy and Mesh Patterns", Computers & Structures, 85, 404-418, 2007 (.pdf)
  71. F.J. Montans and K.J. Bathe, "Towards a Model for Large Strain Anisotropic Elasto-Plasticity", Chapter in Computational Plasticity, E. Onate and R. Owen, eds. , Springer-Verlag, 13-36, 2007
  72. K.J. Bathe, "On Reliable Finite Element Methods for Extreme Loading Conditions", Chapter in Extreme Man-made and Natural Hazards in Dynamics of Structures, A. Ibrahimbegovic and I. Kozar, eds., Springer-Verlag, 2007 (.pdf)
  73. K. J. Bathe, “Conserving Energy and Momentum in Nonlinear Dynamics: A Simple Implicit Time Integration Scheme”, Computers & Structures, 85, 437-445, 2007 (.pdf)
  74. K.J. Bathe and G.A. Ledezma, “Benchmark Problems for Incompressible Fluid Flows with Structural Interactions”, Computers & Structures, 85, 628-644, 2007 (.pdf)
  75. T. Sussman and K.J. Bathe, “A Model of Incompressible Isotropic Hyperelastic Material Behavior using Spline Interpolations of Tension-Compression Test Data", Communications in Numerical Methods in Engineering, 25, 53-63, 2009 (.pdf)
  76. D.N. Kim and K.J. Bathe, “A 4-node 3D-Shell Element to Model Shell Surface Tractions and Incompressible Behavior”, Computers & Structures, 86, 2027-2041, 2008 (.pdf)
  77. K. J. Bathe, “On Finite Element Methods for Nonlinear Dynamic Response”, Proceedings EURODYN 2008, Southampton, U.K., July 2008 (.pdf)
  78. R. S. Sedeh, M. Bathe, and K.J. Bathe, “The Subspace Iteration Method in Protein Normal Mode Analysis”, J. Computational Chemistry, DOI 10.1002/jcc, 2009 (.pdf)
  79. C. Deilmann and K.J. Bathe, “A Holistic Method to Design an Optimized Energy Scenario and Quantitatively Evaluate Promising Technologies for Implementation”, International Journal of Green Energy, 6,1-21, 2009 (.pdf)
  80. D. N. Kim and K.J. Bathe, “A Triangular Six-Node Shell Element”, Computers & Structures, 87, 1451-1460, 2009 (.pdf)
  81. K.J. Bathe, “The Finite Element Method”, in Encyclopedia of Computer Science and Engineering, B. Wah (ed.), J. Wiley and Sons, 1253-1264, 2009 (.pdf)
  82. D.N. Kim, F. Montans, K.J. Bathe, “Insight into a Model for Large Strain Anisotropic Plasticity”, Computational Mechanics, 44, 651-668, 2009 (.pdf)
  83. K.J. Bathe, “Advances in Finite Element Procedures for Nonlinear Dynamic Response”, Proceedings European Conference on Computational Mechanics -- SEECM 2009, Rhodes, Greece, June 2009 (.pdf)
  84. K.J. Bathe and H. Zhang, "A Mesh Adaptivity Procedure for CFD & Fluid-Structure Interactions", Computers & Structures, 87, 604-617, 2009 (.pdf)
  85. J. Degroote, K.J. Bathe and J. Vierendeels, “Performance of a New Partitioned Procedure versus a Monolithic Procedure in Fluid-Structure Interaction”, Computers & Structures, 87, 793-801, 2009 (.pdf)
  86. H. Kohno, K.J. Bathe and J.C. Wright, “A Finite Element Procedure for Multiscale Wave Equations with Application to Plasma Waves”, Computers & Structures, 88, 87-94, 2010 (.pdf)
  87. P.S. Lee and K.J. Bathe, “The Quadratic MITC Plate and MITC Shell Elements in Plate Bending”, Advances in Engineering Software, 41, 712-728, 2010 (.pdf)
  88. D. Chapelle and K.J. Bathe, “On the Ellipticity Condition for Model-Parameter Dependent Mixed Formulations”, Computers & Structures, 88, 581–587, 2010 (.pdf)
  89. K.J. Bathe, “Challenges and Advances in the Analysis of Structures”, Proceedings Fourth International Conference on Structural Engineering, Mechanics and Computation -- SEMC 2010, Cape Town, South Africa  (A. Zingoni, ed). Taylor & Francis/Balkema, 2010 (.pdf)
  90. K.J. Bathe and P.S. Lee, “Measuring the Convergence Behavior of Shell Analysis Schemes”, Computers & Structures, 89, 285-301, 2011 (.pdf)
  91. D.J. Payen and K.J. Bathe, “The use of nodal point forces to improve element stresses”, Computers & Structures, 89, 485-495, 2011 (.pdf)
  92. K.J. Bathe, F. Brezzi and L.D. Marini, “The MITC9 shell element in plate bending: mathematical analysis of a simplified case”, Computational Mechanics, 47, 617-626, 2011 (.pdf)
  93. D.J. Payen and K.J. Bathe, “Improved stresses for the 4-node tetrahedral element”, Computers & Structures, 89, 1265-1273, 2011 (.pdf)

For further publications, see Klaus-Jürgen Bathe in
and
Preface (by J.W. Tedesco and J. Walczak) in Computers & Structures, 81: 455-462, 2003 (.pdf)

 

Scientific and Professional Societies
American Society of Civil Engineers
American Society of Mechanical Engineers
Society for Industrial and Applied Mathematics

http://meche.mit.edu/people/index.html?id=10
Diposting oleh di

Tidak ada komentar:

Posting Komentar

Langganan: Posting Komentar (Atom)